PARASOUND ZPHONO XRM

Savner du platespillerinngang på stereoanlegget ditt? Da er det bare å gå på loftet å hente de gamle LP’ene, for nå har Parasound Zphono XRM kommet! Dette er en enkel og rimelige riaa forsterker som gjør det mulig å koble platespilleren til hvilken som helst forforsterker/hjemmekinoforsterker og gir en lydkvalitet som virkelig rettferdiggjør din gamle platesamling. Lenge leve vinyl!
Zphono XRM skiller seg ut fra mengden med mulighet for å benytte to platespillere samtidig, en med MM og en med MC pickup, mulighet for mono avspilling via egen bryter, tilgang til eget rumble-filter via frontpanelet, både RCA og balansert utgang.
På baksiden av Zphono XRM finnes en impedans justeringsbryter som muliggjør finjustering av inngangs impedansen for MC pickup over et område på 50 ohm til 1050 ohm.

De færreste phono forsterkere gir kjøperne det de virkelig vil ha: praktisk impedansjustering for MC pickup, et on/off rumble filter, en stereo-mono-bryter og balansert XLR-utgang. Og mange har altfor dårlig strømforsyning i forhold til Zphono XRMs høykapasitet lineære strømforsyning med lavt støynivå. Zphono XRM er nok et bevis på at Parasound fortsetter sin støtte av vinyl renessansen.

  • Frequency Response
    • 20-20 kHz, +/- 0.2 dB
  • Total Harmonic Distortion
    • 0.02% at 1 kHz
  • Signal to Noise Ratio, MM 40 dB Setting
    • > 94 dB, input shorted, IHF A-weighted
    • > 90 dB, input shorted, unweighted
  • Signal to Noise Ratio, MM 50 dB Setting
    • > 94 dB, input shorted, IHF A-weighted
    • > 90 dB, input shorted, unweighted
  • Signal to Noise Ratio, MC 50 dB Setting
    • > 92 dB, input shorted, IHF A-weighted
    • > 88 dB, input shorted, unweighted
  • Signal to Noise Ratio, MC 60 dB Setting
    • > 82 dB, input shorted, IHF A-weighted
    • > 80 dB, input shorted, unweighted
  • Inter-channel Crosstalk
    • > 80 dB at 1 kHz
  • Input Impedance
    • MM: 47k Ω
    • MC: 50-1050 Ω
  • Output Impedance
    • Unbalanced: 150 Ω
    • Balanced: 150 Ω per leg
  • Input Sensitivity at 1 kHz, 4mV Input
    • 40 dB: 5 mV for 500mV output
    • 50 dB: 5 mV for 1.5 Volts output
    • 60 dB: 5 mV for 3 Volts output
  • Input Sensitivity at 1 kHz, 1V Output
    • 40 dB: 10 mV for 1.0 Volt output
    • 50 dB: 3.5 mV for 1.0 Volt output
    • 60 dB: 1.8 mV for 1.0 Volt output
  • Total Gain
    • 40 dB / 50 dB / 60 dB (unbalanced output)
    • 46 dB / 56 dB / 66 dB (balanced output)
  • Rumble Filter
    • 40 Hz high pass, 18 dB /oct.
  • AC Power Requirement
    • Standby: 0 watts
  • Power On: 7 watts
    • 115 VAC or 230 VAC 50 – 60 Hz
  • Dimensions
    • Width: 8.5” (220 mm)
    • Depth: 10” (254 mm)
    • Depth: 12” (305 mm) – cables connected
    • Height, with feet: 2” (51 mm)
    • Height, without feet: 1.75” (45 mm), 1U
    • Weight Net: 3.9 lbs. (1.8kg)
    • Shipping: 6.8 lbs. (3.1 kg)
  • Dual inputs for two turntables (1 MM & 1 MC)
  • Front panel input select switch
  • Front panel mono/stereo mode switch
  • Balanced and unbalanced outputs
  • Dual inputs for two turntables (1 MM & 1 MC)
  • Front panel input select switch
  • Front panel mono/stereo mode switch
  • Front panel rumble filter switch
  • Balanced and unbalanced outputs
  • Variable MC impedance adjustment of 50-1050 ohms
  • MM Gain options of 40 dB or 50 dB unbalanced (46 dB/56 dB balanced)
  • MC Gain options of 50 dB or 60 dB unbalanced (56 dB/66 dB balanced)
  • RIAA accurate to within 0.2 dB
  • Ultra-low distortion (<0.02% THD)
  • Ultra high-speed, low-noise opamps
  • Audiophile grade resistors and capacitors
  • Gold-plated RCA input and output jacks
  • Unique half-rack width chassis; 1 rack space high